6mm Dies
-
RCBS Matchmaster Competition Full-Length Bushing Die Set 6mm GT
To determine the proper neck bushing size, measure the outside neck diameter of a loaded cartridge and subtract .002" to .003" to allow for a small amount of brass spring back.
Related Products 6mm GtPrice: $171.99 -
Lee Collet Die Set 6mm Rem
Lee Collet Neck Sizing Die Sets include a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Load Data.
Price: $28.49 -
RCBS MatchMaster Seater Die 6mm x 47 Lapua
The RCBS MatchMaster Die is a combination of the best features from both the Gold Medal and Competition series
Price: $119.99 -
Hornady Match Grade 2-Die Set 6mm Creedmoor .243"
Hornady Match Grade Dies give you total control over neck tension when resizing. Hornady Match Grade Dies feature the ability to use interchangeable, self-centering neck size bushings that eliminate the chance of over-sizing your case necks and overworking the brass. Tight tolerances at the press…
Price: $88.49 -
RCBS MatchMaster Seater Die 6mm GT
The RCBS MatchMaster Die is a combination of the best features from both the Gold Medal and Competition series
Price: $119.99 -
Redding Type S Full Bushing Die 6mm Dasher
…Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under NoslerType S - Bushing Style Neck Sizing Dies. Note: By removing the bushing and all internal parts, the Type-S full bushing die may also be used as a body die.…
Price: $88.99 -
Redding Series D Neck Sizing Die for Bottleneck Cases 6mm Dasher
Redding neck dies for bottleneck cases reshape the neck while leaving the body of the casing unsized for longer case life.
Price: $65.49 -
Redding Body Die 6mm Dasher
Redding has been making Body Dies for Benchrest Shooters for years, but the dies were never a catalogued item. Now, with the introduction of the Bushing Style Neck Sizing die sets, they are available as a companion item for all calibers. Body Dies are designed to full length resize the case body…
Price: $45.99 -
RCBS MatchMaster Seater Die 6mm Dasher
The RCBS MatchMaster Die is a combination of the best features from both the Gold Medal and Competition series
Price: $119.99 -
RCBS MatchMaster Seater Die 6mm BR Remington
The RCBS MatchMaster Die is a combination of the best features from both the Gold Medal and Competition series
Price: $119.99 -
RCBS MatchMaster Seater Die 6mm xC
The RCBS MatchMaster Die is a combination of the best features from both the Gold Medal and Competition series
Price: $119.99 -
RCBS MatchMaster Seater Die 6mm Creedmoor
The RCBS MatchMaster Die is a combination of the best features from both the Gold Medal and Competition series
Price: $119.99 -
Lee Factory Rifle Crimp Die 6mm Rem
…Die features a carbide sizer, which post-sizes your rifle cartridges while crimping this guarantees that every round will chamber freely, just as it would straight out of the factory. This crimp die accommodates a wide range of ammo even jacketed bullets. To use the Lee Factory Rifle Crimp Die, all…
Price: $10.99 -
Lee Quick Trim Die 6mm Creedmoor
Lee Quick Trim Die is compatible with the LEE 90437 Lee Deluxe Quick Trim Case Trimmer.
Price: $9.99 -
RCBS MatchMaster Seater Die 6mm xC
The RCBS MatchMaster Die is a combination of the best features from both the Gold Medal and Competition series
Price: $119.99 -
Redding Master Hunter Die Set 6mm Creedmoor
…Hunter Die Sets were inspired by and requested as a result of the success of the Redding National Match Die Sets. Experienced hunters know that full length resizing is important when a high stress follow-up shot is needed in the “real world” of Hunting. As a result, the upgraded Master Hunter Die…
Price: $158.99
