Ar15 Scopes
-
BLEMISHED Leupold Mark 4 CQ/T Rifle Scope - 1-3x14mm Illuminated CM-R2 Reticle Black Matte
The Mark 4 1-3x14mm CQ/T is a revolutionary optical sight for firearms such as the AR-15 and M16, combining the strengths of a red dot sight and the flexibility of a variable power riflescope. Just as important, the reticle is always visible, with or without batteries, so you’re always prepared. The…
Was: $1199.99 Price: $914.99You Save: $ 285.00 -
VORTEX StrikeFire II 4 MOA Red/Green Dot Scope - Black
…Fahrenheit. * Cantilever Ring Mount - Puts the optic bore center 40 mm above the base, providing lower 1/3 co-witness with iron sights on flat top AR-15 rifles. * Unlimited Eye Relief - Non-critical eye relief for rapid target acquisition. * Adjustable Dot Intensity - Provides ten variable…
Price: $179.99 -
Nikon M-223 Rifle Scope - 3-12x42mm SF Nikoplex Reticle
…points at almost any range up to 600 yards. The Nikoplex Reticle has the high magnification range zoom which makes it the ideal optic for heavy barrel AR15 platforms. Includes the removable ARD objective lens glare. * Compatible with Spot on Custom Turrets * Ultra ClearCoat Optical System * 1/4 Inch…
Was: $459.95 Price: $218.88You Save: $ 241.07 -
Leupold 1-Piece Mark 4 Carry Handle Mount AR-15/M-16, (8-40 Adaptable) - Matte Black
…bases and over a dozen different rings to choose from, Leupold Mark 4 Mounting Systems are incredibly versatile, usable for a wide variety of different weapons. If you are in need of a solid mounting system that will keep your scope secure, look no further than Leupold Mark 4 Mounting Systems.
Related Products Ar 15 Carry HandlePrice: $25.39 -
DNZ 1-Piece Freedom Reaper Picatinny Scope Mount - AR15, 30mm, Matte Black
…can damage a scope, this DNZ Freedom Reaper Picatinny Rail Mount is one high-strength mount made for high-quality scopes. Anodized for longer life, this mount is about one-third the weight of conventional mounts. Made with a rigid design, there are no moving parts between the scope and the gun. This…
Price: $124.99 -
Tasco Optima 2000 Scope Mount System - M16/AR15
…Tasco Optima 2000 Scope Mount System is just what you need for a precision fit when mounting your favorite rifle scope. This particular model was specifically designed for use with AR-15/M16 style weapons to deliver unmatched hold and durability. Not only is the Tasco Optima 2000 Scope Mount System…
Was: $26.49 Price: $24.99You Save: $ 1.50 -
American Defense Mfg. Mount Picatinny Quick Release Fits 1" Scope Black RECON1
The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The AD-Recon works with scopes with Objective Housings as large as 56mm. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and…
Related Products One Piece Scope MountsPrice: $175.57 -
American Defense Mfg. Mount Picatinny Quick Release Fits 1" Scope Black SCOUTS1
The AD-SCOUT mount is made for putting high power glass onto a flattop style AR-15. The cantilever throws the scope out front, allowing you to get the right eye relief. The mount was also designed to accommodate the mounting of full size optics on a short rail, usually found on scout type rifles. It…
Price: $146.28 -
American Defense Mfg. Mount Picatinny Quick Release Fits 30mm Scope Black SCOUTS30
The AD-SCOUTS30 mount is made for putting high power glass onto a flattop style AR-15. The cantilever throws the scope out front, allowing you to get the right eye relief. The mount was also designed to accommodate the mounting of full size optics on a short rail, usually found on scout type rifles.…
Related Products Scout ScopePrice: $131.66 -
American Defense Mfg. AD-RECON-S Scope Mount 30mm Quick Release Black AD-RECON-S 30 STD
Similar to the AD-RECON, the AD-RECON-S mount is made for putting high power glass onto a flattop style AR-15 or bolt action rifle. The AD-RECON-S is a straight up scope mount with no eye relief built in. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize.…
Price: $156.05 -
Bushmaster AR Mini Risers - Set of 2
Bushmaster 93482 Riser For AR Mini Risers Style Black Finish - This set of two Bushmaster BMAS risers increases your scope mounting height on flat top receiver equipped AR15 rifles. Made of hard anodized aircraft aluminum, these risers fit all Weaver and Picatinny rails. 1.25" long, rises 1/2".
Price: $34.49 -
Truglo Picatinny Style Riser Mount - 1/2"
…need for modification. The mount may be used with red dot sights and is ideal for use with scopes. The piece will fit any AR-15 flattop and will raise the mounting platform by a half an inch. The length of this mount is about 4 inches. The design will maximize strength and stability for your scope.
Price: $17.99 -
American Defense Mfg. Mount Picatinny Quick Release Fits 30mm Scope Black RECON30
…mount is made for putting high power glass onto a flattop style AR-15. Features 30 MOA of added elevation adjustment built in to the base. This extra adjustment is great for long range shooting. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision…
Related Products American DefensePrice: $175.57 -
American Defense Mfg. Mount Picatinny Quick Release Fits 30mm Scope High Height Black AD-RECON-H 30
…glass onto a flattop style AR-15. Designed to be used in conjunction with a Laser Sighting System to bring the Objective Housing high enough to clear the laser, or rifles needing a higher cheek weld. This is the tallest mount offered. The cantilever throws the scope out front with 2″ offset,…
Price: $178.49 -
American Defense Mfg. AD-RECON-30 Scope Mount 30 Quick Release Black AD-RECON 30 TAC R
…mount is made for putting high power glass onto a flattop style AR-15. Features 30 MOA of added elevation adjustment built in to the base. This extra adjustment is great for long range shooting. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision…
Price: $175.57 -
American Defense Mfg. AD-RECON-20 Scope Mount 30mm Quick Release Black AD-RECON-20MOA 30 STD
…mount is made for putting high power glass onto a flattop style AR-15. Features 20 MOA of added elevation adjustment built in to the base. This extra adjustment is great for long range shooting. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision…
Price: $181.41
