Die Lock Rings
-
Lyman Split-Loc Die Locking Ring - 7/8"-14 Thread
…it important to keep the set screw from touching the die threads? Because it eliminates the possibility of damage done to the threads. This feature sets the Lyman Split-Lock Die Locking Ring apart from other 7/8-inch-14 thread rings, and it is threaded perfectly for use with standard reloading dies.
Related Products Lock RingPrice: $3.99 -
Hornady Sure-Loc Die Locking Ring 7/8"-14 Thread - 6/ct
The Hornady Sure-Loc Die Locking Ring Set is the perfect addition to your standard 7/8-inchx14 threaded die. The design of this locking ring makes sure that the tightened screw does not come into contact with the threads of the die
Price: $18.49 -
Lee Die Lock Rings - 3/ct
These Lee Die Lock Rings come in a convenient 3-pack, so you never have to worry about running out. These rings have the standard 7/8-inchx14 thread, and they can be finger-tightened so you do not need to buy any extra tools in order to use them. Because these Lee Die Lock Rings can be…
Price: $2.99 -
RCBS Die Locking Ring 7/8 x 14 Thread
…the dies. This die locking ring was made from solid steel to ensure durability for many years to come. If you are looking for a high-quality locking ring to keep your dies in place, look no further than the RCBS Die Locking Ring. This die locking ring fits all standard 7/8-inch-14 threaded dies,…
Related Products Lock RingPrice: $3.49 -
Hornady Sure-loc Die Locking Ring 7/8"-14 Thread - 1 pk.
…precise adjustments of all standard 7/8"-14 dies and accessories. Lock Ring clamps around the whole die, and can't damage the threads. Applies constant pressure across the threads to hold the ring in place. Wrench Flats allow to remove and replace dies without pliers ruining the lock ring. 1-pack.
Price: $3.29 -
Forster Cross Bolt Die Lock Ring, Package of 12
The Forster Cross Bolt Die Lock Ring clamps around the entire die, resulting in a more precise mating of the lock ring threads to the die threads. They are supplied with all Forster’s high quality Bench Rest® Dies. * Easy-to-use cross bolt connects the two ends of the ring instead of a traditional…
Related Products ForsterPrice: $40.49 -
Hornady Quick Change Powder Die
…based on the desired results. The die is designed to be used with the Hornady Case Activated Powder Drop, Powder through Expanders, and Quick Change Powder Die used for reloading cartridges for pistols. Included with the die is a lower bracket complete with lock ring and guide brushing. With this,…
Price: $27.69 -
Forster Cross Bolt Die Lock Ring
The Forster Cross Bolt Die Lock Ring was specifically designed for use with standard 7/8-inchx14 dies. This cross bolt die lock ring has been newly redesigned to solve two problems commonly faced by reloaders
Price: $4.49 -
RCBS Die Lock Ring Wrench - 1-3/16
…the lock ring on your RCBS dies. This tool features a special pivoting handle that gives you increased leverage from horizontal up to 90-degree angles. If you are looking for the perfect tool to facilitate tightening of the lock rings on your RCBS dies, look no further than the RCBS Die Lock Ring…
Price: $7.49 -
Hornady Lock-N-Load Deluxe Die Locking Ring Wrench
…slipping while you adjust the plate as well as secure it to your AP press. Not only is the Hornady Lock-N-Load Deluxe Die Locking Ring Wrench made from high-quality materials to ensure maximum durability, but it features three flats for use in tightening spindle locks and lock rings as well as dies.
Related Products ShellplatePrice: $19.89 -
Hornady Die Maintenance Kit
…of keeping your dies working just like new. Included in the Hornady Die Maintenance Kit are the following: two replacement spindle rods, three replacement large decapping pins, a replacement die locking ring, one replacement expander, and five replacement shellholder retaining rings. What more could…
Price: $11.29 -
Hornady 3-Die Pistol Taper Crimp Die Set 9mm
…This set of dies includes a taper-crimp seater die, a pistol-style expander die, and a titanium-ring full-length sizer die. If you are looking for a quick and easy way to taper-crimp and seat your bullets, look no further than the Hornady 3-Die Pistol Taper Crimp Die Set. These dies are part of the…
Price: $43.99 -
Hornady Match Grade Neck Size Die .308 Win
…and inspecting the case neck. Continue to lower the die until the entire neck has been sized. (Note: Do NOT lower the die too far; excessive pressure will cause the case to buckle making it unusable.) When the die is adjusted, lock the lock ring against the press and tighten the set screw. Lower the…
Price: $43.99 -
Hornady Match Grade Neck Size Die 6mm PPC
…and inspecting the case neck. Continue to lower the die until the entire neck has been sized. (Note: Do NOT lower the die too far; excessive pressure will cause the case to buckle making it unusable.) When the die is adjusted, lock the lock ring against the press and tighten the set screw. Lower the…
Price: $43.99 -
Hornady Lock-N-Load Powder Measure
…a standard mounting bracket and lock ring, or use our Lock-N-Load bushings to mount this versatile measure on the Fast Load Powder Measure Stand or on the Lock-N-Load AP with case activated powder drop for automatic powder measuring during reloading. THE O - RING ON THE METERING INSERT ADJUSTMENT…
Price: $75.49 -
Hornady Lock-N-Load Classic Kit
…with a company lifetime warranty. The single-stage press has a frame made from cast alloy with an O-ring design, angled frame, bushings for changing dies quickly, easy-grip handle, and positive priming system that includes small and large primer cups. An automatic primer feeder is sold separately.…
Was: $323.49 Price: $259.99You Save: $ 63.50
