Flash Hider

Bravo Company A2X Flash Hider 5.56MM 1/2x28 RH Black BCM-A2X

The A2X is an extended version of the A2 flash hider found on the M16 and M4 series of rifles. * Threaded 1/2"x 28 for your 5.56mm carbine. * Machined from 4150 steel. * Phosphate coated per MIL-STD-171. * Predrilled hole at the base for permanent installation. * When mounted per BATF specifications…

Battenfeld Technologies Delta Series AR Combo Tool

…pins designed to hold up to heavy torque requirements. A cut out for a ½” drive allows the tool to be used with a torque wrench or ratchet driver. Profiles for buffer tube lock nut and flash hider are included. The addition of a bit driver and bit holder with six common bits adds to the versatility.

Del-Ton A2 Flash Hider

A2 Flash Hider (does NOT include crush washer) Threaded 1/2" by 28. ***Only to be used on .223 or 5.56 caliber rifles

POF Flash Hider and Locknut kit for 223 / 5.56 - 1/2x28 Threads

The POF-USA Flash Hider was designed in house by the engineering team at Patriot Ordnance Factory. This muzzle device, available in both .223/.308 configurations does an excellent job at eliminating the large majority of muzzle flash without adding a bulky device to your weapon system. Each device…

Anderson Manufacturing 7-1/2” 300 Blackout Barrel Kit

Complete Barrel kit - Includes 7.5” 300 blackout barrel. 1-7 twist. Parkerize/Phosphate Finish, Pistol Gas Set Up, 5/8-24 threads,pistol gas tube, Anderson Low profile gas block, A2 flash hider with crush washer.

CMMG Flash Hider FNH P90 Style M12 x 1 LH

Use this with a short barrel on your PS90 SBR build.

Gemtech Blast Jacket Titanium Black

…million compressions, built to last. It keeps short guns short at 2.55" overall and is a great addition to anyone's load out. * Requires GEMTECH Flash hider or Muzzle Brake for use; sold separately. * Caliber: Fits And Functions On Rifles That Are Compatible With Either 7.62 Or 5.56 Bi-lock Qm (308…

CMMG Striker Flash Hider - 1/2x28

Del-Ton 11.5in. Flat Top Barrel Assembly with Pinned 5.5in. Flash Hider

* 11.5" 1x9 twist, Heavy profile * 5.5" Flash Hider Pinned/Welded * Flat Top Upper with White T-Marks & M4 Feed Ramps * HPT/MPI tested Bolt and Carrier assembly * Charging Handle * CAR Handguards * ***This upper is assembled, head spaced, and test fired.

Bravo Company Compensator MOD1 Flash Hider 556NATO 1/2x28 Fits AR Rifles Black BCM-GFC-MOD-1-556

…comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure. * Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction. * Dual action brake minimizes side pressure and designed to have…

Grovtec Muzzle Thread Protector For most AR Barrels 1/2-28 x .700 GTHM-245 1/2-28 x .700" Outside Diameter

Protects threads when not using muzzle brakes, flash hiders or suppressors. Features quality steel construction and premium black-oxide finish. GTHM-245 1/2-28 x .700" Outside Diameter Most AR Barrels.

Muzzle Thread Protector For Glock 17 & 19 most 9mm GTHM-244 1/2-28 x .625" Outside Diameter

Protects threads when not using muzzle brakes, flash hiders or suppressors. Features quality steel construction and premium black-oxide finish. GTHM-244 1/2-28 x .625" Outside Diameter for Aftermarket 9mm Barrels.

Smith & Wesson M&P10 Magazine .308 cal Black 10/rd

…•Lightweight profile 18" 4140 steel barrel w/corrosion resistant finish & 1:10" twist •9310 steel bolt •Chromed gas key bolt carrier & firing pin •Type III hard anodized 7075 T6 aluminum receiver •6.15 lbs. trigger pull •Ambidextrous safety selector & bolt release •Enhanced flash hider •7.71 lbs.

CMMG Barrel 10.4inch PS90 4150CMV CL 1:9 5.7x28

Great choice for your PS90 SBR project. Pair this with a CMMG PS90 Flash hider or thread adaptor to complete your SBR. * 10.4″ * 4150 Chrome Moly Vanadium * Chrome Lined * Maganese Phosphate Coated * 1:9 Twist * 5.7×28 Chamber * Threaded M12x1.0 LH

Adams Arms Upper 5.56 7.5" BBL P2 Adjustable

…the P-Series lineup. The P2 model includes an ergonomic free float rail that covers the all new P-Series Micro Block piston system. This upper features a Manimal flash hider and ambidextrous charging handle. The P2 is your off-the-shelf, tactical model that is configurable for any type of shooter.

Adams Arms Upper 5.56 11.5 BBL P2 Adjustable

…The P2 model includes an ergonomic free float rail that covers the all new P-Series Micro Block piston system. This upper features a Manimal flash hider and ambidextrous charging handle. The P2 is your off-the-shelf, tactical model that is configurable for any type of shooter. SPECS: Upper Receiver:…