Lee Classic Cast Press
-
Lee Breech Lock Class Cast Single Stage Press - All Cartridges up to .460 Weatherby Mag / 50 Rds per hr
The Lee Breech Lock Classic Cast makes it possible to change dies instantly. The Classic Cast is made from strong and durable cast iron, featuring outstanding workmanship and all-steel linkage. The finish is double powder coated, and the adjustable handle can be moved easily from right to left and…
Price: $131.49 -
Lee Classic Cast Single Stage Press - All Cartridges up to .50 BMG
…the Lee Classic Cast Press are two primer arms for both small and large primers. This press is also designed with start and stop positions that can be easily adjusted using a 48-tooth ratchet handle clamp. The heavy-duty construction ensures every reloading session is outstanding. This cast press…
Price: $131.49 -
Lee Classic Cast 50 BMG Press Kit
The Lee Classic Cast 50 BMG Press Kit is loaded with features, making it popular among serious reloaders like you. This is a single-stage press designed with a rigid cast iron O-frame complete with a large opening. The press also boasts a 4-inch ram stroke and has extremely strong compound linkage…
Price: $255.99 -
Lee Full-Length 2-Die Set .50 BMG (Large Series Thread 1-1/4"-12) fits Classic Cast Press Only
Lee Large series (1 1/4x12 thread) 2-die set for 50 BMG, used with the Classic Cast Press only. Includes Full Length Sizing Die, Bullet Seating Die, and Instructions. Does not include shell holder or powder dipper.
Price: $86.49 -
Lee Collet 2-Die Set .50 BMG (Large Series Thread 1-1/4"-12) fits Classic Cast Press Only
Lee Large series (1 1/4x12 thread) collet necksizing 2-die set for 50 BMG, used with the Classic Cast Press only. Includes Collet Neck Sizing Die, Bullet Seating Die, and Instructions. Does not include shell holder or powder dipper.
Price: $86.49 -
Lee Collet 2-Die Set .338 Lapua (Large Series Thread 1-1/4"-12) fits Classic Cast Press Only
Lee Large series (1 1/4x12 thread) collet necksizing 2-die set for 338 Lapua, used with the Classic Cast Press only. Includes Collet Neck Sizing Die, Bullet Seating Die, and Instructions. Does not include shell holder or powder dipper.
Price: $86.49 -
Lee 4-Hole Classic Turret Press
…rigid cast iron frame supports the ram with over 12 square inches of area. The industry's largest ram is drilled completely through to dispense primers in an attached clear PVC tube. Every primer is caught--guaranteed. Instant change turrets are the same as the famous Lee Turret Press. The Classic…
Price: $112.49 -
Hornady Lock-N-Load IRON PRESS Kit with Auto Prime
…* Cast Iron frame - Heaviest / most rigid in class (26 pounds assembled weight) * Same mounting pattern as Hornady AP / Classic Press and RCBS Rock Chucker * Ambidextrous operation * Patented Lock-N-Load bushing system * Patented Shell Holder Platform (Only compatible with Hornady, RCBS, and Lee…
Was: $594.99 Price: $469.99You Save: $ 125.00 -
Lee Safety Prime
…Used with 2006 and newer Breech Lock Challenger, Turret Presses, Classic Turret Press, Breech Lock Classic Cast, and the Classic Cast Press. Note: Depending on die configuration on the Turret Press, the Auto Disk Riser may need to be purchased to provide adequate clearance for the Lee Safety Prime.
Price: $20.99 -
Lee 1 1/4-12 Breech Lock Update Kit
…green or red press to allow use of Lee's Breech Lock quick-change bushing feature. Kit includes : * 1 1/4"-12 breech lock adapter * Spline drive lock-ring eliminator * Lock-ring wrench Compatible with the following presses : * Lee Precision Classic Cast * Hornady Iron * Hornady Classic / Lock-N-Load…
Price: $6.99 -
Lee 50 BMG Ram Prime
The low-priced Lee 50 BMG Ram Prime is manufactured from quality materials in the United States. This ram prime is made specifically for use with large series .50 BMG and goes with the Classic Cast Press. The manufacturer notes that the shell holder priming holes of other manufacturers may be too…
Price: $17.49 -
Lee 50 BMG Shell Holder
For reloading of large series of .50 BMG, the Lee 50 BMG Shell Holder is the ideal choice. This competitively priced shell holder is designed to work with the Classic Cast Press. The product is made in the United States and, as with all Lee products, comes with a solid company guarantee. Control is…
Price: $13.99 -
Lee Large Series Factory Crimp Die - .50 BMG
Lee Large series (1 1/4x12 thread) 50 BMG Factory Crimp Die, used with the Classic Cast Press only, crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure…
Related Products 50 Bmg ReloadingPrice: $34.99 -
Lee Large Series Factory Crimp Rifle Die .338 Lapua
Lee Large Series (1 1/4x12 thread) 338 LAPUA Factory Crimp Die, used with the Classic Cast Press only, crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because…
Price: $34.99
