Rcbs Shell Holder
-
RCBS Single Stage Shell Holder #5 Size
RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
Price: $7.99 -
RCBS Extended Shell Holder #10 Size
The RCBS Die Maintenance Kit is a must-have for the serious reloader. This kit includes everything you need to keep your RCBS reloading dies in good condition to ensure premium-level performance. This maintenance kit works with any reloading die and will keep all of your dies in prime working…
Price: $13.99 -
RCBS Universal Hand Priming Tool
The Universal Hand Priming tool combines the universal shell holder from the APS® tool with the primer tray from the standard tool to offer unmatched performance. The universal shell holder accept cases from .32 ACP to .45-70 Government. The safety gate isolates the primer seating operation from the…
Was: $69.99 Price: $62.99You Save: $ 7.00 -
RCBS - Shell Holder Rack
…RCBS - Shell Holder Rack, the long and tedious process of sorting through loose shellholders is eliminated. As a result, finding the exact holder needed is much easier. This rack helps keep shells organized and can accommodate as many as 24 shell holders and, as a bonus, six Trim Pro trimmer shell…
Price: $13.99 -
RCBS Single Stage Shell Holder #49 - .40-60/.45-60 - Ten-X Brass Only
The RCBS #49 Shell Holder was designed to accommodate 45-60 WCF and 40-60 WCF cases, able to adapt any single-stage reloading press for use with those types of cases. With the RCBS #49 Shell Holder, you do not have to buy an entirely new reloading press. RCBS Single Stage shell holders are built…
Price: $7.99 -
RCBS 3 Die Set - Group H - Straight Wall Cartridges - .38 S&W
…hardened until they are tough enough to meet RCBS standards, yet smooth enough to baby the most delicate brass case. Each die box contains a label for recording your favorite loads and can be mounted on the inside lid for quick reference. Uses shell holder #06. Reloading straight-wall type cases…
Was: $159.50 Price: $98.46You Save: $ 61.04 -
RCBS AmmoMaster/ Piggyback Shell Plate
RCBS 5-Station Shell Plates properly align the case with the reloading die during reloading. They’re built from hardened steel and capture 0.125-inch of the case head for proper SAAMI headspacing. They feature five stations and are for use on PiggyBack, PiggyBack II, PiggyBack—3, PiggyBack—4,…
Price: $18.76 -
RCBS Case Trimmer Shell Holder #10
RCBS Trim Pro Case Trimmers feature uniquely shaped shell holders to firmly hold rifle and pistol cases in perfect alignment with the cutter. This system allows for accurate and repeatable case trimming lengths and leaves the case mouths square to the body. Trim Pro Shell Holders are numbered the…
Price: $7.49 -
RCBS Extended Shell Holder #3 Size
The RCBS Die Maintenance Kit is a must-have for the serious reloader. This kit includes everything you need to keep your RCBS reloading dies in good condition to ensure premium-level performance. This maintenance kit works with any reloading die and will keep all of your dies in prime working…
Price: $13.99 -
RCBS Case Trimmer Shell Holder #32
RCBS Trim Pro Case Trimmers feature uniquely shaped shell holders to firmly hold rifle and pistol cases in perfect alignment with the cutter. This system allows for accurate and repeatable case trimming lengths and leaves the case mouths square to the body. Trim Pro Shell Holders are numbered the…
Related Products Rcbs Case TrimmerPrice: $7.49 -
RCBS AR Tactical Reloading Kit
…qualities of RCBS products. Save with this packaged deal today! Kit Includes: * RS5 Press (Reloader Special-5 Press) * Case Slick Spray Lube * Uniflow Powder Measure * Stainless Steel Dial Caliper * Primer Pocket Swager - Bench Tool * Universal Hand Priming Tool * Shell Holders; #3, #10, #32 *…
Was: $549.99 Price: $391.99You Save: $ 158.00 -
RCBS Single Stage Shell Holder #29 Size
RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
Price: $7.99 -
RCBS Single Stage Shell Holder #45 Size
RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
Price: $7.99 -
RCBS Single Stage Shell Holder #11 Size
RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
Price: $7.99 -
RCBS Single Stage Shell Holder #28 Size
RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
Price: $7.99 -
RCBS Single Stage Shell Holder #6 Size
RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
Related Products #6 Shell HolderPrice: $7.99
