Shell Holder
-
Lee Universal Shell Holder Set
…Lee Universal Shell Holder Set comes in a variety of sizes used for different calibers associated with reloading. Because this is a universal part, it works incredibly well with nearly all single-stage presses, although it is not designed for the Lee Auto Prime. The shell holder set is constructed…
Price: $32.49 -
RCBS Single Stage Shell Holder #3 Size
RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
Price: $7.99 -
RCBS Single Stage Shell Holder #4 Size
RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
Price: $7.99 -
Hornady Shell Holder #6 - .38 Special/.357 Magnum/7.62x39mm Russian
The Hornady Shell Holder is made to help with the reloading of different caliber cartridges, including .380 ACP, .221 Remington Fireball, 6mm TCU, .222 Remington Magnum, 7x47mm Helm, .20 Tactical, .204 Ruger, and others. This shell holder is precision machined from solid steel, followed by being…
Was: $4.49 Price: $3.59You Save: $ 0.90 -
Lee Collet Die Set .300 Weatherby
Lee Collet Neck Sizing Die Sets include a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Load Data.
Price: $28.49 -
Lee Universal Shell Holder - #2 Size
The Lee Universal Shell Holder comes in different sizes, according to the type of cartridges being reloaded. This product is made in the United States; being a universal part, it works in most brands of presses. This shell holder is perfect for a wide range of calibers, including .45 ACP, 7mm/08,…
Price: $4.49 -
Lee Universal Shell Holder - #1 Size
The Lee Universal Shell Holder comes in different sizes, according to the type of cartridges being reloaded. This product is made in the United States; being a universal part, it works in most brands of presses. This shell holder is perfect for a wide range of calibers, including .45 ACP, 7mm/08,…
Price: $4.49 -
Redding E-Z Feed Shell Holder - #5 Size
…Additionally, these shell holders are precision-machined to very close tolerances to ensure a perfect fit for your cases and to eliminate any potential problems. Not only are Redding E-Z Feed Shell Holders available in a variety of sizes, but the universal design of the shell holder itself ensures…
Related Products Redding Shell HoldersPrice: $8.99 -
Hornady Shellholders Pkg of 5 (1,2,5,16,35)
Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. Hornady steel shell holders also fit most other brands of reloading presses. Note: The 50 BMG Shell Holder will only fit the 50 BMG Press and will not fit the other…
Price: $17.29 -
RCBS Competition Extended Shell Holder #3
The RCBS Competition Extended Shell Holder allows reloaders to work with short cartridges when using the RCBS Competition Seater Die. It is made of hardened steel and is black oxide coated. Note: Extended Shell Holders do not have a hole drilled out to decap brass during sizing. Note: Only for use…
Related Products Competition Shell HolderPrice: $13.99 -
Lee Universal Shell Holder - #4 Size
The Lee Universal Shell Holder comes in different sizes, according to the type of cartridges being reloaded. This product is made in the United States; being a universal part, it works in most brands of presses. This shell holder is perfect for a wide range of calibers, including .45 ACP, 7mm/08,…
Price: $4.49 -
Hornady Shell Holder #5 - 7mm Remington Magnum/.300 Winchester Magnum/.338 Winchester Magnum
The Hornady Shell Holder is made to help with the reloading of different caliber cartridges, including .380 ACP, .221 Remington Fireball, 6mm TCU, .222 Remington Magnum, 7x47mm Helm, .20 Tactical, .204 Ruger, and others. This shell holder is precision machined from solid steel, followed by being…
Was: $4.49 Price: $3.59You Save: $ 0.90 -
RCBS Single Stage Shell Holder #19 Size
RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
Related Products Rcbs Shell HolderPrice: $7.99 -
RCBS Single Stage Shell Holder #6 Size
RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They're sized to fit specific case heads and capture 0.125 inch of the case head for proper SAAMI headspacing.
Related Products Rcbs Shell HolderPrice: $7.99 -
Lyman Shell Holder Set
This Lyman Shell Holder Set is made from durable steel, affordably priced, and designed to provide years of reloading service. This set includes 12 of the most popular shell holders in a convenient storage box. Because of the different sizes, the shell holders in this set fit over 75 different…
Price: $34.49 -
Lee Auto Prime Shell Holder #2
…hand. This shell holder is used with the Lee Auto Prime and will only fit the Auto Prime as opposed to a reloading press. In all, there are 20 unique sizes of this shell holder to accommodate every need. There is also a shell holder kit available, which features 11 popular shell holders designed to…
Price: $2.49
